Power

SCPI Commands :

[SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:POWer:STEP
[SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:POWer:[STARt]

class PowerCls

Power commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get_start() → float

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:POWer:[STARt]
value: float = driver.source.bb.arbitrary.mcarrier.edit.carrier.power.get_start()

Sets the power for the individual carriers in the defined carrier range.

return

start: float Range: -80 to 0, Unit: dB

get_step() → float

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:POWer:STEP
value: float = driver.source.bb.arbitrary.mcarrier.edit.carrier.power.get_step()

Sets the step width by which the starting power of the carriers in the defined carrier range is incremented.

return

step: float Range: -80 to 80, Unit: dB

set_start(start: float) → None

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:POWer:[STARt]
driver.source.bb.arbitrary.mcarrier.edit.carrier.power.set_start(start = 1.0)

Sets the power for the individual carriers in the defined carrier range.

param start

float Range: -80 to 0, Unit: dB

set_step(step: float) → None

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:POWer:STEP
driver.source.bb.arbitrary.mcarrier.edit.carrier.power.set_step(step = 1.0)

Sets the step width by which the starting power of the carriers in the defined carrier range is incremented.

param step

float Range: -80 to 80, Unit: dB