Cload

SCPI Command :

[SOURce<HW>]:BB:ARBitrary:MCARrier:CLOad

Commands in total: 1
Subgroups: 0
Direct child commands: 1

set() → None[source]

# [SOURce<HW>]:BB:ARBitrary:MCARrier:CLOad
driver.source.bb.arbitrary.mcarrier.cload.set()

Creates a multi-carrier waveform using the current entries of the carrier table and activates the ARB generator. Use the command method RsSmbv.source.bb.arbitrary.mcarrier.ofile() to define the multi-carrier waveform file name. The file extension is wv.

set_with_opc(opc_timeout_ms: int = -1) → None[source]

# [SOURce<HW>]:BB:ARBitrary:MCARrier:CLOad
driver.source.bb.arbitrary.mcarrier.cload.set_with_opc()

Creates a multi-carrier waveform using the current entries of the carrier table and activates the ARB generator. Use the command method RsSmbv.source.bb.arbitrary.mcarrier.ofile() to define the multi-carrier waveform file name. The file extension is wv.

Same as set, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

Parameters:: opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.