Phase

SCPI Commands :

[SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe:STEP
[SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe:[STARt]

class PhaseCls

Phase commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get_start() → float

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe:[STARt]
value: float = driver.source.bb.arbitrary.mcarrier.edit.carrier.phase.get_start()

Sets the start phase for the individual carriers in the defined carrier range.

return

start: float Range: 0 to 359.99, Unit: DEG

get_step() → float

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe:STEP
value: float = driver.source.bb.arbitrary.mcarrier.edit.carrier.phase.get_step()

Sets the step width by which the start phases of the carriers in the defined carrier range is incremented.

return

step: float Range: -359.99 to 359.99, Unit: DEG

set_start(start: float) → None

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe:[STARt]
driver.source.bb.arbitrary.mcarrier.edit.carrier.phase.set_start(start = 1.0)

Sets the start phase for the individual carriers in the defined carrier range.

param start

float Range: 0 to 359.99, Unit: DEG

set_step(step: float) → None

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe:STEP
driver.source.bb.arbitrary.mcarrier.edit.carrier.phase.set_step(step = 1.0)

Sets the step width by which the start phases of the carriers in the defined carrier range is incremented.

param step

float Range: -359.99 to 359.99, Unit: DEG