Clipping

SCPI Commands :

[SOURce<HW>]:BB:ARBitrary:MCARrier:CLIPping:CFACtor
[SOURce<HW>]:BB:ARBitrary:MCARrier:CLIPping:CUToff
[SOURce<HW>]:BB:ARBitrary:MCARrier:CLIPping:[STATe]

class ClippingCls

Clipping commands group definition. 3 total commands, 0 Subgroups, 3 group commands

get_cfactor() → float

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:CLIPping:CFACtor
value: float = driver.source.bb.arbitrary.mcarrier.clipping.get_cfactor()

Sets the value of the desired crest factor, if baseband clipping is enabled. A target crest factor above the crest factor of the unclipped multicarrier signal has no effect.

return

cfactor: float Range: -50 to 50, Unit: dB

get_cutoff() → float

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:CLIPping:CUToff
value: float = driver.source.bb.arbitrary.mcarrier.clipping.get_cutoff()

Sets the cutoff frequency of the final low pass filter, if baseband clipping is enabled.

return

cutoff: float Range: 0 to 250E6

get_state() → bool

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:CLIPping:[STATe]
value: bool = driver.source.bb.arbitrary.mcarrier.clipping.get_state()

Switches baseband clipping on and off.

return

state: 1| ON| 0| OFF

set_cfactor(cfactor: float) → None

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:CLIPping:CFACtor
driver.source.bb.arbitrary.mcarrier.clipping.set_cfactor(cfactor = 1.0)

Sets the value of the desired crest factor, if baseband clipping is enabled. A target crest factor above the crest factor of the unclipped multicarrier signal has no effect.

param cfactor

float Range: -50 to 50, Unit: dB

set_cutoff(cutoff: float) → None

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:CLIPping:CUToff
driver.source.bb.arbitrary.mcarrier.clipping.set_cutoff(cutoff = 1.0)

Sets the cutoff frequency of the final low pass filter, if baseband clipping is enabled.

param cutoff

float Range: 0 to 250E6

set_state(state: bool) → None

# SCPI: [SOURce<HW>]:BB:ARBitrary:MCARrier:CLIPping:[STATe]
driver.source.bb.arbitrary.mcarrier.clipping.set_state(state = False)

Switches baseband clipping on and off.

param state

1| ON| 0| OFF