Step

SCPI Commands :

[SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:STEP:MANual
[SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:STEP:[EXTernal]

class StepCls[source]

Step commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get_external() → float[source]

# SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:STEP:[EXTernal]
value: float = driver.source.bb.w3Gpp.mstation.enhanced.dpdch.dpControl.step.get_external()

This command sets step width by which - with Dynamic Power Control being switched on - the channel power of the enhanced channels is increased or decreased.

return

external: float Range: 0.5 to 6, Unit: dB

get_manual() → RsSmbv.enums.PowContStepMan[source]

# SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:STEP:MANual
value: enums.PowContStepMan = driver.source.bb.w3Gpp.mstation.enhanced.dpdch.dpControl.step.get_manual()

Sets the control signal for manual mode of Dynamic Power Control.

return

manual: MAN0| MAN1

set_external(external: float) → None[source]

# SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:STEP:[EXTernal]
driver.source.bb.w3Gpp.mstation.enhanced.dpdch.dpControl.step.set_external(external = 1.0)

This command sets step width by which - with Dynamic Power Control being switched on - the channel power of the enhanced channels is increased or decreased.

param external

float Range: 0.5 to 6, Unit: dB

set_manual(manual: RsSmbv.enums.PowContStepMan) → None[source]

# SCPI: [SOURce<HW>]:BB:W3GPp:MSTation:[ENHanced]:[DPDCh]:DPControl:STEP:MANual
driver.source.bb.w3Gpp.mstation.enhanced.dpdch.dpControl.step.set_manual(manual = enums.PowContStepMan.MAN0)

Sets the control signal for manual mode of Dynamic Power Control.

param manual

MAN0| MAN1