I0

SCPI Command :

[SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:CSIRs:NZP:SET<GR0>:RES<USER0>:I0

class I0Cls

I0 commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(userNull=UserNull.Default, cellNull=CellNull.Default, bwPartNull=BwPartNull.Default, resourceSetNull=ResourceSetNull.Default, resourceNull=ResourceNull.Default) → int

# SCPI: [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:CSIRs:NZP:SET<GR0>:RES<USER0>:I0
value: int = driver.source.bb.nr5G.ubwp.user.cell.downlink.bwp.csirs.nzp.set.res.i0.get(userNull = repcap.UserNull.Default, cellNull = repcap.CellNull.Default, bwPartNull = repcap.BwPartNull.Default, resourceSetNull = repcap.ResourceSetNull.Default, resourceNull = repcap.ResourceNull.Default)

Sets the parameters l0 and l1 and define the ZP CSI-RS location relative to the start of as slot.

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bwp’)

param resourceSetNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Set’)

param resourceNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Res’)

return

i_0: No help available

set(i_0: int, userNull=UserNull.Default, cellNull=CellNull.Default, bwPartNull=BwPartNull.Default, resourceSetNull=ResourceSetNull.Default, resourceNull=ResourceNull.Default) → None

# SCPI: [SOURce<HW>]:BB:NR5G:UBWP:USER<US(CH0)>:CELL<CC(ST0)>:DL:BWP<BWP(DIR0)>:CSIRs:NZP:SET<GR0>:RES<USER0>:I0
driver.source.bb.nr5G.ubwp.user.cell.downlink.bwp.csirs.nzp.set.res.i0.set(i_0 = 1, userNull = repcap.UserNull.Default, cellNull = repcap.CellNull.Default, bwPartNull = repcap.BwPartNull.Default, resourceSetNull = repcap.ResourceSetNull.Default, resourceNull = repcap.ResourceNull.Default)

Sets the parameters l0 and l1 and define the ZP CSI-RS location relative to the start of as slot.

param i_0

integer Range: 2 to 12

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Bwp’)

param resourceSetNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Set’)

param resourceNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Res’)