Tboms

SCPI Command :

[SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:TBOMs
class TbomsCls[source]

Tboms commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default) → RsSmbv.enums.NumberofSlots[source]
# SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:TBOMs
value: enums.NumberofSlots = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.tboms.get(cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default)
Selects the number of slots the PUSCH transport block is transmitted on.

INTRO_CMD_HELP: Prerequisites for this command

  • [:SOURce<hw>]:BB:NR5G:UBWP:USER<us>:CELL<cc>:UL:BWP<bwp>:UCI:MODE = UCLS

  • [:SOURce<hw>]:BB:NR5G:UBWP:RESTart = COAL

  • [:SOURce<hw>]:BB:NR5G:UBWP:USER<us>:USCH:CCODing:STATe = ON

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

param allocationNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

return

num_slots_tboms: No help available

set(num_slots_tboms: RsSmbv.enums.NumberofSlots, cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default) → None[source]
# SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:TBOMs
driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.tboms.set(num_slots_tboms = enums.NumberofSlots.N1, cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default)
Selects the number of slots the PUSCH transport block is transmitted on.

INTRO_CMD_HELP: Prerequisites for this command

  • [:SOURce<hw>]:BB:NR5G:UBWP:USER<us>:CELL<cc>:UL:BWP<bwp>:UCI:MODE = UCLS

  • [:SOURce<hw>]:BB:NR5G:UBWP:RESTart = COAL

  • [:SOURce<hw>]:BB:NR5G:UBWP:USER<us>:USCH:CCODing:STATe = ON

param num_slots_tboms

N1| N2| N4| N8

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

param allocationNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)