Scid

SCPI Command :

[SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PUSCh:PTRS:TP:SCID

class ScidCls

Scid commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default) → RsSmbv.enums.NrsIdAll

# SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PUSCh:PTRS:TP:SCID
value: enums.NrsIdAll = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pusch.ptrs.tp.scid.get(cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default)

Sets whether the PTRS Scrambling ID value used for the PTRS sequence generation is configured by the ‘NPusch ID’ (higher layer) or by the cell ID.

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

param allocationNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

return

tp_ptrs_scram_id: CID| PUID CID Sets the cell ID as the scrambling ID for PTRS sequence generation. PUID Sets the ‘NPusch ID’ as the scrambling ID for PTRS sequence generation.

set(tp_ptrs_scram_id: RsSmbv.enums.NrsIdAll, cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default) → None

# SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PUSCh:PTRS:TP:SCID
driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pusch.ptrs.tp.scid.set(tp_ptrs_scram_id = enums.NrsIdAll.CID, cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default)

Sets whether the PTRS Scrambling ID value used for the PTRS sequence generation is configured by the ‘NPusch ID’ (higher layer) or by the cell ID.

param tp_ptrs_scram_id

CID| PUID CID Sets the cell ID as the scrambling ID for PTRS sequence generation. PUID Sets the ‘NPusch ID’ as the scrambling ID for PTRS sequence generation.

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

param allocationNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)