ApSelect<AntennaPortNull>

RepCap Settings

# Range: Nr0 .. Nr2001
rc = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pusch.dmrs.apSelect.repcap_antennaPortNull_get()
driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pusch.dmrs.apSelect.repcap_antennaPortNull_set(repcap.AntennaPortNull.Nr0)

SCPI Command :

[SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PUSCh:[DMRS]:APSelect<S2US0>

class ApSelectCls[source]

ApSelect commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: AntennaPortNull, default value after init: AntennaPortNull.Nr0

get(cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default, antennaPortNull=AntennaPortNull.Default) → RsSmbv.enums.Nr5GpuschAp[source]

# SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PUSCh:[DMRS]:APSelect<S2US0>
value: enums.Nr5GpuschAp = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pusch.dmrs.apSelect.get(cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default, antennaPortNull = repcap.AntennaPortNull.Default)

Each layer of a PUSCH allocation is mapped to a certain antenna port. By the command the antenna ports are selected which are used for the transmission of the PUSCH allocation.

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

param allocationNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

param antennaPortNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘ApSelect’)

return

pusch_ap_sel: AP0| AP1| AP2| AP3| AP4| AP5| AP6| AP7| AP8| AP9| AP10| AP11

set(pusch_ap_sel: RsSmbv.enums.Nr5GpuschAp, cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default, antennaPortNull=AntennaPortNull.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PUSCh:[DMRS]:APSelect<S2US0>
driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pusch.dmrs.apSelect.set(pusch_ap_sel = enums.Nr5GpuschAp.AP0, cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default, antennaPortNull = repcap.AntennaPortNull.Default)

Each layer of a PUSCH allocation is mapped to a certain antenna port. By the command the antenna ports are selected which are used for the transmission of the PUSCH allocation.

param pusch_ap_sel

AP0| AP1| AP2| AP3| AP4| AP5| AP6| AP7| AP8| AP9| AP10| AP11

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

param allocationNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

param antennaPortNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘ApSelect’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pusch.dmrs.apSelect.clone()