Apcsirs

SCPI Command :

[SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PDSCh:TXSCheme:APCSirs
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default) → NumApsCsiRs[source]
# [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PDSCh:TXSCheme:APCSirs
value: enums.NumApsCsiRs = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pdsch.txScheme.apcsirs.get(cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default)

Selects the number of antenna ports the CSI-RS is transmitted on. Prerequisites for this command

  • Select precoding based on a codebook (method RsSmbv.source.bb.nr5G.ubwp.user.cell.downlink.bwp.pdsch.prec.mod.set() ) .

Parameters:

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

  • subframeNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

  • userNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

  • bwPartNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

  • allocationNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

set(num_aps_csi_rs: NumApsCsiRs, cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default) → None[source]
# [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:PDSCh:TXSCheme:APCSirs
driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.pdsch.txScheme.apcsirs.set(num_aps_csi_rs = enums.NumApsCsiRs.N1, cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default)

Selects the number of antenna ports the CSI-RS is transmitted on. Prerequisites for this command

  • Select precoding based on a codebook (method RsSmbv.source.bb.nr5G.ubwp.user.cell.downlink.bwp.pdsch.prec.mod.set() ) .

Parameters:

  • num_aps_csi_rs – N1 CSI-RS transmission on one antenna port. N2 CSI-RS transmission on two antenna ports. N4 CSI-RS transmission on four antenna ports.

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

  • subframeNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

  • userNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

  • bwPartNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

  • allocationNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)