Mod

SCPI Command :

[SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:[CW<CW(S2US0)>]:MOD

class ModCls

Mod commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default, codewordNull=CodewordNull.Default) → RsSmbv.enums.ModType

# SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:[CW<CW(S2US0)>]:MOD
value: enums.ModType = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.cw.mod.get(cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default, codewordNull = repcap.CodewordNull.Default)

Sets the modulation scheme.

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

param allocationNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

param codewordNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cw’)

return

modulation: BPSK| BPSK2| QPSK| QAM16| QAM64| QAM256| QAM1024 Supported modulations depend on the channel.

set(modulation: RsSmbv.enums.ModType, cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default, codewordNull=CodewordNull.Default) → None

# SCPI: [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:[CW<CW(S2US0)>]:MOD
driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.cw.mod.set(modulation = enums.ModType.BPSK, cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default, codewordNull = repcap.CodewordNull.Default)

Sets the modulation scheme.

param modulation

BPSK| BPSK2| QPSK| QAM16| QAM64| QAM256| QAM1024 Supported modulations depend on the channel.

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

param userNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

param bwPartNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

param allocationNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

param codewordNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cw’)