Power

SCPI Command :

[SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:CS:DCI<DCI(S2US0)>:POWer
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default, indexNull=IndexNull.Default) → float[source]
# [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:CS:DCI<DCI(S2US0)>:POWer
value: float = driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.cs.dci.power.get(cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default, indexNull = repcap.IndexNull.Default)

Defines the power of PDSCH allocations according to the CORESET DCI. Prerequisites for this command

  • Select Auto DCI mode (method RsSmbv.source.bb.nr5G.scheduling.mode() ) .

  • Select one of the DCI formats for PDSCH scheduling (method RsSmbv.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.cs.dci.fmt.set() ) .

Parameters:

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

  • subframeNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

  • userNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

  • bwPartNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

  • allocationNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

  • indexNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Dci’)

Returns:

dci_power: float Range: -80 to 10

set(dci_power: float, cellNull=CellNull.Default, subframeNull=SubframeNull.Default, userNull=UserNull.Default, bwPartNull=BwPartNull.Default, allocationNull=AllocationNull.Default, indexNull=IndexNull.Default) → None[source]
# [SOURce<HW>]:BB:NR5G:SCHed:CELL<CC(CH0)>:SUBF<SF(ST0)>:USER<US(DIR0)>:BWPart<BWP(GR0)>:ALLoc<AL(USER0)>:CS:DCI<DCI(S2US0)>:POWer
driver.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.cs.dci.power.set(dci_power = 1.0, cellNull = repcap.CellNull.Default, subframeNull = repcap.SubframeNull.Default, userNull = repcap.UserNull.Default, bwPartNull = repcap.BwPartNull.Default, allocationNull = repcap.AllocationNull.Default, indexNull = repcap.IndexNull.Default)

Defines the power of PDSCH allocations according to the CORESET DCI. Prerequisites for this command

  • Select Auto DCI mode (method RsSmbv.source.bb.nr5G.scheduling.mode() ) .

  • Select one of the DCI formats for PDSCH scheduling (method RsSmbv.source.bb.nr5G.scheduling.cell.subf.user.bwPart.alloc.cs.dci.fmt.set() ) .

Parameters:

  • dci_power – float Range: -80 to 10

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

  • subframeNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

  • userNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘User’)

  • bwPartNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘BwPart’)

  • allocationNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Alloc’)

  • indexNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Dci’)