Data

SCPI Command :

[SOURce<HW>]:BB:C2K:PPARameter:TCHannel:DATA:RATE

class DataCls[source]

Data commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get_rate() → RsSmbv.enums.Cdma2KdataRate[source]

# SCPI: [SOURce<HW>]:BB:C2K:PPARameter:TCHannel:DATA:RATE
value: enums.Cdma2KdataRate = driver.source.bb.c2K.pparameter.tchannel.data.get_rate()

This command sets the data rate of F-FCH and F-SCH. The set value is specific for the selected radio configuration. The setting takes effect only after execution of command [:SOURce<hw>]:BB:C2K:PPARameter:EXECute. It is specific for the selected radio configuration. The value range depends on the frame length. If the frame length is changed so that the set data rate becomes invalid, the next permissible value is automatically set. The data rate affects the Walsh code (spreading factor) that are possible within a channel. If a data rate is changed so that the selected Walsh code becomes invalid, the next permissible value is automatically set.

return

rate: DR1K2| DR1K3| DR1K5| DR1K8| DR2K4| DR2K7| DR3K6| DR4K8| DR7K2| DR9K6| DR14K4| DR19K2| DR28K8| DR38K4| DR57K6| DR76K8| DR115K2| DR153K6| DR230K4| DR259K2| DR307K2| DR460K8| DR518K4| DR614K4| DR1036K8| NUSed

set_rate(rate: RsSmbv.enums.Cdma2KdataRate) → None[source]

# SCPI: [SOURce<HW>]:BB:C2K:PPARameter:TCHannel:DATA:RATE
driver.source.bb.c2K.pparameter.tchannel.data.set_rate(rate = enums.Cdma2KdataRate.DR1036K8)

This command sets the data rate of F-FCH and F-SCH. The set value is specific for the selected radio configuration. The setting takes effect only after execution of command [:SOURce<hw>]:BB:C2K:PPARameter:EXECute. It is specific for the selected radio configuration. The value range depends on the frame length. If the frame length is changed so that the set data rate becomes invalid, the next permissible value is automatically set. The data rate affects the Walsh code (spreading factor) that are possible within a channel. If a data rate is changed so that the selected Walsh code becomes invalid, the next permissible value is automatically set.

param rate

DR1K2| DR1K3| DR1K5| DR1K8| DR2K4| DR2K7| DR3K6| DR4K8| DR7K2| DR9K6| DR14K4| DR19K2| DR28K8| DR38K4| DR57K6| DR76K8| DR115K2| DR153K6| DR230K4| DR259K2| DR307K2| DR460K8| DR518K4| DR614K4| DR1036K8| NUSed