Adjust

SCPI Command :

[SOURce<HW>]:BB:C2K:POWer:ADJust

class AdjustCls

Adjust commands group definition. 1 total commands, 0 Subgroups, 1 group commands

set() → None

# SCPI: [SOURce<HW>]:BB:C2K:POWer:ADJust
driver.source.bb.c2K.power.adjust.set()

The command sets the power of the active channels in such a way that the total power of the active channels is 0 dB. This does not change the power ratio among the individual channels.

set_with_opc(opc_timeout_ms: int = - 1) → None

# SCPI: [SOURce<HW>]:BB:C2K:POWer:ADJust
driver.source.bb.c2K.power.adjust.set_with_opc()

The command sets the power of the active channels in such a way that the total power of the active channels is 0 dB. This does not change the power ratio among the individual channels.

Same as set, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.