Power

SCPI Command :

[SOURce<HW>]:BB:C2K:MSTation<ST>:CHANnel<CH>:POWer

class PowerCls

Power commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(mobileStation=MobileStation.Default, channel=Channel.Default) → float

# SCPI: [SOURce<HW>]:BB:C2K:MSTation<ST>:CHANnel<CH>:POWer
value: float = driver.source.bb.c2K.mstation.channel.power.get(mobileStation = repcap.MobileStation.Default, channel = repcap.Channel.Default)

Sets the channel power relative to the powers of the other channels. This setting also determines the starting power of the channel for Misuse Output Power Control. With the command [:SOURce<hw>]:BB:C2K:POWer:ADJust, the power of all the activated channels is adapted so that the total power corresponds to 0 dB. This does not change the power ratio among the individual channels. For the traffic channels, this value is specific for the selected radio configuration.

param mobileStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Channel’)

return

power: float Range: -80 to 0

set(power: float, mobileStation=MobileStation.Default, channel=Channel.Default) → None

# SCPI: [SOURce<HW>]:BB:C2K:MSTation<ST>:CHANnel<CH>:POWer
driver.source.bb.c2K.mstation.channel.power.set(power = 1.0, mobileStation = repcap.MobileStation.Default, channel = repcap.Channel.Default)

Sets the channel power relative to the powers of the other channels. This setting also determines the starting power of the channel for Misuse Output Power Control. With the command [:SOURce<hw>]:BB:C2K:POWer:ADJust, the power of all the activated channels is adapted so that the total power corresponds to 0 dB. This does not change the power ratio among the individual channels. For the traffic channels, this value is specific for the selected radio configuration.

param power

float Range: -80 to 0

param mobileStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Channel’)