Mode

SCPI Command :

[SOURce<HW>]:BB:C2K:MSTation<ST>:CCODing:MODE

class ModeCls[source]

Mode commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(mobileStation=MobileStation.Default) → RsSmbv.enums.Cdma2KcodMode[source]

# SCPI: [SOURce<HW>]:BB:C2K:MSTation<ST>:CCODing:MODE
value: enums.Cdma2KcodMode = driver.source.bb.c2K.mstation.ccoding.mode.get(mobileStation = repcap.MobileStation.Default)

The command selects the channel coding mode.

param mobileStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)

return

mode: OFF| COMPlete| NOINterleaving| OINTerleaving OFF Channel coding is deactivated. COMPlete The complete channel coding is performed. The channel coding procedure can slightly vary depending on channel type, frame length and data rate. OINTerleaving Except for the block interleaver, the whole channel coding procedure is carried out. NOINterleaving In this mode, only block interleaver is used for coding.

set(mode: RsSmbv.enums.Cdma2KcodMode, mobileStation=MobileStation.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:C2K:MSTation<ST>:CCODing:MODE
driver.source.bb.c2K.mstation.ccoding.mode.set(mode = enums.Cdma2KcodMode.COMPlete, mobileStation = repcap.MobileStation.Default)

The command selects the channel coding mode.

param mode

OFF| COMPlete| NOINterleaving| OINTerleaving OFF Channel coding is deactivated. COMPlete The complete channel coding is performed. The channel coding procedure can slightly vary depending on channel type, frame length and data rate. OINTerleaving Except for the block interleaver, the whole channel coding procedure is carried out. NOINterleaving In this mode, only block interleaver is used for coding.

param mobileStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)