Dbinonht

SCPI Command :

[SOURce<HW>]:BB:WLNN:FBLock<CH>:DBINonht

class DbinonhtCls

Dbinonht commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(frameBlock=FrameBlock.Default) → RsSmbv.enums.WlannFbDynBwInNonHt

# SCPI: [SOURce<HW>]:BB:WLNN:FBLock<CH>:DBINonht
value: enums.WlannFbDynBwInNonHt = driver.source.bb.wlnn.fblock.dbinonht.get(frameBlock = repcap.FrameBlock.Default)

(available only for VHT Tx mode) Modifys the first 7 bits of the scrambling sequence to indicate if the transmitter is capable of ‘Static’ or ‘Dynamic’ bandwidth operation.

param frameBlock

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fblock’)

return

dbinonht: STAT| DYN| OFF STAT The transmitter is capable of static bandwidth operation. DYN The transmitter is capable of dynamic bandwidth operation. OFF Dynamic bandwidth in Non HT is not present.

set(dbinonht: RsSmbv.enums.WlannFbDynBwInNonHt, frameBlock=FrameBlock.Default) → None

# SCPI: [SOURce<HW>]:BB:WLNN:FBLock<CH>:DBINonht
driver.source.bb.wlnn.fblock.dbinonht.set(dbinonht = enums.WlannFbDynBwInNonHt.DYN, frameBlock = repcap.FrameBlock.Default)

(available only for VHT Tx mode) Modifys the first 7 bits of the scrambling sequence to indicate if the transmitter is capable of ‘Static’ or ‘Dynamic’ bandwidth operation.

param dbinonht

STAT| DYN| OFF STAT The transmitter is capable of static bandwidth operation. DYN The transmitter is capable of dynamic bandwidth operation. OFF Dynamic bandwidth in Non HT is not present.

param frameBlock

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Fblock’)