PoNack

SCPI Command :

[SOURce<HW>]:BB:W3GPp:MSTation<ST>:DPCCh:HS:MIMO:PONAck

class PoNackCls

PoNack commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(mobileStation=MobileStation.Default) → float

# SCPI: [SOURce<HW>]:BB:W3GPp:MSTation<ST>:DPCCh:HS:MIMO:PONAck
value: float = driver.source.bb.w3Gpp.mstation.dpcch.hs.mimo.poNack.get(mobileStation = repcap.MobileStation.Default)

(up to Release 7) Sets the power offset Poff_NACK/ACK of an NACK/ACK response to two scheduled transport blocks relative to the CQI Power PCQI ([:SOURce<hw>]:BB:W3GPp:MSTation<st>:DPCCh:HS:POWer) . The power PNACK/ACK used during the HARQ-ACK slots is calculated as: PNACK/ACK = PCQI + Poff_NACK/ACK

param mobileStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)

return

po_nack: float Range: -10 to 10

set(po_nack: float, mobileStation=MobileStation.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:MSTation<ST>:DPCCh:HS:MIMO:PONAck
driver.source.bb.w3Gpp.mstation.dpcch.hs.mimo.poNack.set(po_nack = 1.0, mobileStation = repcap.MobileStation.Default)

(up to Release 7) Sets the power offset Poff_NACK/ACK of an NACK/ACK response to two scheduled transport blocks relative to the CQI Power PCQI ([:SOURce<hw>]:BB:W3GPp:MSTation<st>:DPCCh:HS:POWer) . The power PNACK/ACK used during the HARQ-ACK slots is calculated as: PNACK/ACK = PCQI + Poff_NACK/ACK

param po_nack

float Range: -10 to 10

param mobileStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)