PoMode

SCPI Command :

[SOURce<HW>]:BB:W3GPp:MSTation<ST>:CMODe:POMode

class PoModeCls[source]

PoMode commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(mobileStation=MobileStation.Default) → RsSmbv.enums.AutoUser[source]

# SCPI: [SOURce<HW>]:BB:W3GPp:MSTation<ST>:CMODe:POMode
value: enums.AutoUser = driver.source.bb.w3Gpp.mstation.cmode.poMode.get(mobileStation = repcap.MobileStation.Default)

The command selects the power offset mode.

param mobileStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)

return

po_mode: AUTO| USER AUTO The power offset is obtained by pilot bit ratio as follows: Number of pilots bits of non-compressed slots / Number of pilot bits by compressed slots. USER The power offset is defined by command [:SOURcehw]:BB:W3GPp:BSTationst|MSTationst:CMODe:POFFset.

set(po_mode: RsSmbv.enums.AutoUser, mobileStation=MobileStation.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:W3GPp:MSTation<ST>:CMODe:POMode
driver.source.bb.w3Gpp.mstation.cmode.poMode.set(po_mode = enums.AutoUser.AUTO, mobileStation = repcap.MobileStation.Default)

The command selects the power offset mode.

param po_mode

AUTO| USER AUTO The power offset is obtained by pilot bit ratio as follows: Number of pilots bits of non-compressed slots / Number of pilot bits by compressed slots. USER The power offset is defined by command [:SOURcehw]:BB:W3GPp:BSTationst|MSTationst:CMODe:POFFset.

param mobileStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)