Data

SCPI Command :

[SOURce<HW>]:BB:W3GPp:MSTation<ST>:CHANnel<CH>:DPDCh:DATA

class DataCls

Data commands group definition. 3 total commands, 2 Subgroups, 1 group commands

get(mobileStation=MobileStation.Default, channel=Channel.Default) → RsSmbv.enums.DataSourceA

# SCPI: [SOURce<HW>]:BB:W3GPp:MSTation<ST>:CHANnel<CH>:DPDCh:DATA
value: enums.DataSourceA = driver.source.bb.w3Gpp.mstation.channel.dpdch.data.get(mobileStation = repcap.MobileStation.Default, channel = repcap.Channel.Default)

The command determines the data source for the selected DPDCH. For the enhanced channels of user equipment 1 (UE1) , this entry is valid when channel coding is deactivated. When channel coding is active, data sources are selected for the transport channels with the commands BB:W3GPp:MST:CHANnel:DPDCh:DCCH:DATA and BB:W3GPp:MST:ENHanced:TCHannel:DATA.

param mobileStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Channel’)

return

data: PN9| PN11| PN15| PN16| PN20| PN21| PN23| DLISt| ZERO | ONE| PATTern PNxx The pseudo-random sequence generator is used as the data source. Different random sequence lengths can be selected. DLISt A data list is used. The data list is selected with the command [:SOURcehw]:BB:W3GPp:MSTationst:CHANnelch:DPDCh:DATA:DSELect. ZERO | ONE Internal 0 and 1 data is used. PATTern Internal data is used. The bit pattern for the data is defined by the command [:SOURcehw]:BB:W3GPp:MSTationst:CHANnelch:DPDCh:DATA:PATTern.

set(data: RsSmbv.enums.DataSourceA, mobileStation=MobileStation.Default, channel=Channel.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:MSTation<ST>:CHANnel<CH>:DPDCh:DATA
driver.source.bb.w3Gpp.mstation.channel.dpdch.data.set(data = enums.DataSourceA.DLISt, mobileStation = repcap.MobileStation.Default, channel = repcap.Channel.Default)

The command determines the data source for the selected DPDCH. For the enhanced channels of user equipment 1 (UE1) , this entry is valid when channel coding is deactivated. When channel coding is active, data sources are selected for the transport channels with the commands BB:W3GPp:MST:CHANnel:DPDCh:DCCH:DATA and BB:W3GPp:MST:ENHanced:TCHannel:DATA.

param data

PN9| PN11| PN15| PN16| PN20| PN21| PN23| DLISt| ZERO | ONE| PATTern PNxx The pseudo-random sequence generator is used as the data source. Different random sequence lengths can be selected. DLISt A data list is used. The data list is selected with the command [:SOURcehw]:BB:W3GPp:MSTationst:CHANnelch:DPDCh:DATA:DSELect. ZERO | ONE Internal 0 and 1 data is used. PATTern Internal data is used. The bit pattern for the data is defined by the command [:SOURcehw]:BB:W3GPp:MSTationst:CHANnelch:DPDCh:DATA:PATTern.

param mobileStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Channel’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.w3Gpp.mstation.channel.dpdch.data.clone()

Subgroups

• Dselect
• Pattern