Trigger

SCPI Commands :

[SOURce<HW>]:BB:OFDM:TRIGger:RMODe
[SOURce<HW>]:BB:OFDM:TRIGger:SLENgth
[SOURce<HW>]:BB:OFDM:TRIGger:SLUNit
[SOURce<HW>]:BB:OFDM:TRIGger:SOURce
[SOURce<HW>]:BB:OFDM:[TRIGger]:SEQuence
class TriggerCls[source]

Trigger commands group definition. 23 total commands, 6 Subgroups, 5 group commands

get_rmode() → RsSmbv.enums.TrigRunMode[source]
# SCPI: [SOURce<HW>]:BB:OFDM:TRIGger:RMODe
value: enums.TrigRunMode = driver.source.bb.ofdm.trigger.get_rmode()

Queries the status of waveform output.

return

trig_run_mode: STOP| RUN

get_sequence() → RsSmbv.enums.DmTrigMode[source]
# SCPI: [SOURce<HW>]:BB:OFDM:[TRIGger]:SEQuence
value: enums.DmTrigMode = driver.source.bb.ofdm.trigger.get_sequence()

Sets the trigger mode.

return

trig_mode: AUTO| RETRigger| AAUTo| ARETrigger| SINGle

get_sl_unit() → RsSmbv.enums.UnitSlB[source]
# SCPI: [SOURce<HW>]:BB:OFDM:TRIGger:SLUNit
value: enums.UnitSlB = driver.source.bb.ofdm.trigger.get_sl_unit()

Defines the unit for the entry of the length of the signal sequence to be output in the SINGle trigger mode.

return

trig_seq_len_unit: SEQuence| SAMPle

get_slength() → int[source]
# SCPI: [SOURce<HW>]:BB:OFDM:TRIGger:SLENgth
value: int = driver.source.bb.ofdm.trigger.get_slength()

Defines the length of the signal sequence to be output in the SINGle trigger mode.

return

trig_seq_len: integer Range: 1 to dynamic

get_source() → RsSmbv.enums.TrigSour[source]
# SCPI: [SOURce<HW>]:BB:OFDM:TRIGger:SOURce
value: enums.TrigSour = driver.source.bb.ofdm.trigger.get_source()


    INTRO_CMD_HELP: Selects the trigger signal source and determines the way the triggering is executed. Provided are:

    - Internal triggering by a command (INTernal)
    - External trigger signal via one of the User x connectors EGT1: External global trigger
    - In primary-secondary instrument mode, the external baseband synchronization signal (BBSY)
    - EXTernal: Setting only Provided only for backward compatibility with other Rohde & Schwarz signal generators. The R&S SMBV100B accepts this value and maps it automatically as follows: EXTernal = EGT1

    :return: trig_source: INTernal| EGT1| EXTernal| BBSY
set_sequence(trig_mode: RsSmbv.enums.DmTrigMode) → None[source]
# SCPI: [SOURce<HW>]:BB:OFDM:[TRIGger]:SEQuence
driver.source.bb.ofdm.trigger.set_sequence(trig_mode = enums.DmTrigMode.AAUTo)

Sets the trigger mode.

param trig_mode

AUTO| RETRigger| AAUTo| ARETrigger| SINGle

set_sl_unit(trig_seq_len_unit: RsSmbv.enums.UnitSlB) → None[source]
# SCPI: [SOURce<HW>]:BB:OFDM:TRIGger:SLUNit
driver.source.bb.ofdm.trigger.set_sl_unit(trig_seq_len_unit = enums.UnitSlB.SAMPle)

Defines the unit for the entry of the length of the signal sequence to be output in the SINGle trigger mode.

param trig_seq_len_unit

SEQuence| SAMPle

set_slength(trig_seq_len: int) → None[source]
# SCPI: [SOURce<HW>]:BB:OFDM:TRIGger:SLENgth
driver.source.bb.ofdm.trigger.set_slength(trig_seq_len = 1)

Defines the length of the signal sequence to be output in the SINGle trigger mode.

param trig_seq_len

integer Range: 1 to dynamic

set_source(trig_source: RsSmbv.enums.TrigSour) → None[source]
# SCPI: [SOURce<HW>]:BB:OFDM:TRIGger:SOURce
driver.source.bb.ofdm.trigger.set_source(trig_source = enums.TrigSour.BBSY)


    INTRO_CMD_HELP: Selects the trigger signal source and determines the way the triggering is executed. Provided are:

    - Internal triggering by a command (INTernal)
    - External trigger signal via one of the User x connectors EGT1: External global trigger
    - In primary-secondary instrument mode, the external baseband synchronization signal (BBSY)
    - EXTernal: Setting only Provided only for backward compatibility with other Rohde & Schwarz signal generators. The R&S SMBV100B accepts this value and maps it automatically as follows: EXTernal = EGT1

    :param trig_source: INTernal| EGT1| EXTernal| BBSY

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.ofdm.trigger.clone()

Subgroups