Notch<NotchFilter>

RepCap Settings

# Range: Nr1 .. Nr8
rc = driver.source.bb.ofdm.notch.repcap_notchFilter_get()
driver.source.bb.ofdm.notch.repcap_notchFilter_set(repcap.NotchFilter.Nr1)

SCPI Commands :

[SOURce<HW>]:BB:OFDM:NOTCh:CLOCk
[SOURce<HW>]:BB:OFDM:NOTCh:COUNt
[SOURce<HW>]:BB:OFDM:NOTCh

class NotchCls[source]

Notch commands group definition. 8 total commands, 4 Subgroups, 3 group commands Repeated Capability: NotchFilter, default value after init: NotchFilter.Nr1

get_clock() → int[source]

# SCPI: [SOURce<HW>]:BB:OFDM:NOTCh:CLOCk
value: int = driver.source.bb.ofdm.notch.get_clock()

Queries the current clock frequency of the waveform signal. Works like the command [:SOURce<hw>]:BB:ARBitrary:CLOCk.

return

clock_freq: integer Range: 400 to 2000E6

get_count() → int[source]

# SCPI: [SOURce<HW>]:BB:OFDM:NOTCh:COUNt
value: int = driver.source.bb.ofdm.notch.get_count()

Sets the number of notches.

return

num_of_notch: No help available

get_value() → bool[source]

# SCPI: [SOURce<HW>]:BB:OFDM:NOTCh
value: bool = driver.source.bb.ofdm.notch.get_value()

Enables or disables the notch filter.

return

notch_state: 1| ON| 0| OFF

set_count(num_of_notch: int) → None[source]

# SCPI: [SOURce<HW>]:BB:OFDM:NOTCh:COUNt
driver.source.bb.ofdm.notch.set_count(num_of_notch = 1)

Sets the number of notches.

param num_of_notch

integer Range: 1 to 25

set_value(notch_state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:OFDM:NOTCh
driver.source.bb.ofdm.notch.set_value(notch_state = False)

Enables or disables the notch filter.

param notch_state

1| ON| 0| OFF

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.ofdm.notch.clone()

Subgroups