Delay

SCPI Command :

[SOURce]:BB:IMPairment:RF<CH>:DELay

class DelayCls

Delay commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(path=Path.Default) → float

# SCPI: [SOURce]:BB:IMPairment:RF<CH>:DELay
value: float = driver.source.bb.impairment.rf.delay.get(path = repcap.Path.Default)

Defines the time delay of both I and Q vectors between the marker signal at the marker outputs relative to the signal generation start. A positive value means that the I and Q vectors delay relative to the marker/trigger and vice versa. Value range

Table Header: Output / Min /s / Max /s / Increment

• RF<ch> / 0 / 10E-6 / 1E-12

• IQOutput<ch> / 500E-9 / 500E-9 / 1E-12

• DIGital / 500E-9 / 500E-9 / 1E-12

param path

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Rf’)

return

delay: float Range: 0 to 10E-6

set(delay: float, path=Path.Default) → None

# SCPI: [SOURce]:BB:IMPairment:RF<CH>:DELay
driver.source.bb.impairment.rf.delay.set(delay = 1.0, path = repcap.Path.Default)

Defines the time delay of both I and Q vectors between the marker signal at the marker outputs relative to the signal generation start. A positive value means that the I and Q vectors delay relative to the marker/trigger and vice versa. Value range

Table Header: Output / Min /s / Max /s / Increment

• RF<ch> / 0 / 10E-6 / 1E-12

• IQOutput<ch> / 500E-9 / 500E-9 / 1E-12

• DIGital / 500E-9 / 500E-9 / 1E-12

param delay

float Range: 0 to 10E-6

param path

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Rf’)