Optimization

SCPI Commands :

[SOURce<HW>]:BB:IMPairment:OPTimization:MODE
[SOURce<HW>]:BB:IMPairment:OPTimization:STATe

Commands in total: 2

Subgroups: 0

Direct child commands: 2

get_mode() → OptimizationMode

# [SOURce<HW>]:BB:IMPairment:OPTimization:MODE
value: enums.OptimizationMode = driver.source.bb.impairment.optimization.get_mode()

Sets the optimization mode.

Returns:

mode: FAST| | QHIGh FAST Optimization by compensation for I/Q skew. QHIGh Optimization by compensation for I/Q skew and frequency response correction. This mode interrupts the RF signal. Do not use it in combination with the uninterrupted level settings and strictly monotone modes RF level modes. (See method RsSmbv.source.power.lbehaviour() .)

get_state() → bool

# [SOURce<HW>]:BB:IMPairment:OPTimization:STATe
value: bool = driver.source.bb.impairment.optimization.get_state()

No help available

set_mode(mode: OptimizationMode) → None

# [SOURce<HW>]:BB:IMPairment:OPTimization:MODE
driver.source.bb.impairment.optimization.set_mode(mode = enums.OptimizationMode.FAST)

Sets the optimization mode.

Parameters:

mode – FAST| | QHIGh FAST Optimization by compensation for I/Q skew. QHIGh Optimization by compensation for I/Q skew and frequency response correction. This mode interrupts the RF signal. Do not use it in combination with the uninterrupted level settings and strictly monotone modes RF level modes. (See method RsSmbv.source.power.lbehaviour() .)

set_state(state: bool) → None

# [SOURce<HW>]:BB:IMPairment:OPTimization:STATe
driver.source.bb.impairment.optimization.set_state(state = False)

No help available