Quadrature

SCPI Command :

[SOURce]:BB:IMPairment:DIGital:QUADrature:[ANGLe]
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get_angle() → float[source]
# [SOURce]:BB:IMPairment:DIGital:QUADrature:[ANGLe]
value: float = driver.source.bb.impairment.digital.quadrature.get_angle()

Sets a quadrature offset (phase angle) between the I and Q vectors deviating from the ideal 90 degrees. A positive quadrature offset results in a phase angle greater than 90 degrees. Value range Impairments / Min /dB / Max /dB / Increment

  • Digital / 30 / 30 / 0.01

  • Analog / 10 / 10 / 0.01

Returns:

angle: float Range: -30 to 30, Unit: DEG

set_angle(angle: float) → None[source]
# [SOURce]:BB:IMPairment:DIGital:QUADrature:[ANGLe]
driver.source.bb.impairment.digital.quadrature.set_angle(angle = 1.0)

Sets a quadrature offset (phase angle) between the I and Q vectors deviating from the ideal 90 degrees. A positive quadrature offset results in a phase angle greater than 90 degrees. Value range Impairments / Min /dB / Max /dB / Increment

  • Digital / 30 / 30 / 0.01

  • Analog / 10 / 10 / 0.01

Parameters:

angle – float Range: -30 to 30, Unit: DEG