Area<ObscuredArea>

RepCap Settings

# Range: Nr1 .. Nr16
rc = driver.source.bb.gnss.receiver.v.environment.full.area.repcap_obscuredArea_get()
driver.source.bb.gnss.receiver.v.environment.full.area.repcap_obscuredArea_set(repcap.ObscuredArea.Nr1)

SCPI Command :

[SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:ENVironment:FULL:AREA<CH>:DELete

class AreaCls

Area commands group definition. 6 total commands, 5 Subgroups, 1 group commands Repeated Capability: ObscuredArea, default value after init: ObscuredArea.Nr1

delete(vehicle=Vehicle.Default, obscuredArea=ObscuredArea.Default) → None

# SCPI: [SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:ENVironment:FULL:AREA<CH>:DELete
driver.source.bb.gnss.receiver.v.environment.full.area.delete(vehicle = repcap.Vehicle.Default, obscuredArea = repcap.ObscuredArea.Default)

Appends, insertes or deletes an obscured zone.

param vehicle

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

param obscuredArea

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Area’)

delete_with_opc(vehicle=Vehicle.Default, obscuredArea=ObscuredArea.Default, opc_timeout_ms: int = - 1) → None

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.gnss.receiver.v.environment.full.area.clone()

Subgroups

• Append
• Count
• Insert
• Length
• Reference