Length

SCPI Command :

[SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:ENVironment:FULL:AREA<CH>:LENGth

class LengthCls

Length commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(vehicle=Vehicle.Default, obscuredArea=ObscuredArea.Default) → float

# SCPI: [SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:ENVironment:FULL:AREA<CH>:LENGth
value: float = driver.source.bb.gnss.receiver.v.environment.full.area.length.get(vehicle = repcap.Vehicle.Default, obscuredArea = repcap.ObscuredArea.Default)

Sets the length of the obscuring zone, defined in km or sec.

param vehicle

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

param obscuredArea

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Area’)

return

length: float Range: 1E-3 to 50

set(length: float, vehicle=Vehicle.Default, obscuredArea=ObscuredArea.Default) → None

# SCPI: [SOURce<HW>]:BB:GNSS:RECeiver:[V<ST>]:ENVironment:FULL:AREA<CH>:LENGth
driver.source.bb.gnss.receiver.v.environment.full.area.length.set(length = 1.0, vehicle = repcap.Vehicle.Default, obscuredArea = repcap.ObscuredArea.Default)

Sets the length of the obscuring zone, defined in km or sec.

param length

float Range: 1E-3 to 50

param vehicle

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

param obscuredArea

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Area’)