Lcod

SCPI Command :

[SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:RPHYs:LCOD:STATe

class LcodCls

Lcod commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get_state() → bool

# SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:RPHYs:LCOD:STATe
value: bool = driver.source.bb.btooth.econfiguration.pconfiguration.rphys.lcod.get_state()

Specifies preferred physical layers in Rx (..:RPHYs:..) or Tx (..:TPHYs:..) direction. Information is signaled via LL_PHY_REQ and LL_PHY_RSP. You can enable one or more PHYs: L1M for LE uncoded 1 Msymbol/s PHY, L2M for LE uncoded 2 Msymbol/s PHY, and LCOD for LE coded 1 Msymbol/s PHY.

return

rphys: No help available

set_state(rphys: bool) → None

# SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:RPHYs:LCOD:STATe
driver.source.bb.btooth.econfiguration.pconfiguration.rphys.lcod.set_state(rphys = False)

Specifies preferred physical layers in Rx (..:RPHYs:..) or Tx (..:TPHYs:..) direction. Information is signaled via LL_PHY_REQ and LL_PHY_RSP. You can enable one or more PHYs: L1M for LE uncoded 1 Msymbol/s PHY, L2M for LE uncoded 2 Msymbol/s PHY, and LCOD for LE coded 1 Msymbol/s PHY.

param rphys

1| ON| 0| OFF