State

SCPI Command :

[SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:RPHYs:L2M<CH0>:STATe

class StateCls

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channelNull=ChannelNull.Default) → bool

# SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:RPHYs:L2M<CH0>:STATe
value: bool = driver.source.bb.btooth.econfiguration.pconfiguration.rphys.l2M.state.get(channelNull = repcap.ChannelNull.Default)

Specifies preferred physical layers in Rx (..:RPHYs:..) or Tx (..:TPHYs:..) direction. Information is signaled via LL_PHY_REQ and LL_PHY_RSP. You can enable one or more PHYs: L1M for LE uncoded 1 Msymbol/s PHY, L2M for LE uncoded 2 Msymbol/s PHY, and LCOD for LE coded 1 Msymbol/s PHY.

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘L2M’)

return

rphys: No help available

set(rphys: bool, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:RPHYs:L2M<CH0>:STATe
driver.source.bb.btooth.econfiguration.pconfiguration.rphys.l2M.state.set(rphys = False, channelNull = repcap.ChannelNull.Default)

Specifies preferred physical layers in Rx (..:RPHYs:..) or Tx (..:TPHYs:..) direction. Information is signaled via LL_PHY_REQ and LL_PHY_RSP. You can enable one or more PHYs: L1M for LE uncoded 1 Msymbol/s PHY, L2M for LE uncoded 2 Msymbol/s PHY, and LCOD for LE coded 1 Msymbol/s PHY.

param rphys

1| ON| 0| OFF

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘L2M’)