Mode

SCPI Command :

[SOURce<HW>]:BB:TDSCdma:UP:CELL<ST>:ENH:DCH:HSDPA:HARQ:MODE

class ModeCls

Mode commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(cell=Cell.Default) → RsSmbv.enums.EnhHsHarqMode

# SCPI: [SOURce<HW>]:BB:TDSCdma:UP:CELL<ST>:ENH:DCH:HSDPA:HARQ:MODE
value: enums.EnhHsHarqMode = driver.source.bb.tdscdma.up.cell.enh.dch.hsdpa.harq.mode.get(cell = repcap.Cell.Default)

Sets the HARQ simulation mode.

param cell

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cell’)

return

mode: CACK| CNACk CACK New data is used for each new TTI. This mode is used to simulate maximum throughput transmission. CNACk Enables NACK simulation, i.e. depending on the sequence selected with command BB:TDSC:DOWN:CELL1:ENH:DCH:HSDPA:RVS packets are retransmitted. This mode is used for testing with varying redundancy version.

set(mode: RsSmbv.enums.EnhHsHarqMode, cell=Cell.Default) → None

# SCPI: [SOURce<HW>]:BB:TDSCdma:UP:CELL<ST>:ENH:DCH:HSDPA:HARQ:MODE
driver.source.bb.tdscdma.up.cell.enh.dch.hsdpa.harq.mode.set(mode = enums.EnhHsHarqMode.CACK, cell = repcap.Cell.Default)

Sets the HARQ simulation mode.

param mode

CACK| CNACk CACK New data is used for each new TTI. This mode is used to simulate maximum throughput transmission. CNACk Enables NACK simulation, i.e. depending on the sequence selected with command BB:TDSC:DOWN:CELL1:ENH:DCH:HSDPA:RVS packets are retransmitted. This mode is used for testing with varying redundancy version.

param cell

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cell’)