Data

SCPI Command :

[SOURce<HW>]:BB:TDSCdma:DOWN:CELL<ST>:ENH:DCH:HSUPA:DATA

class DataCls

Data commands group definition. 3 total commands, 2 Subgroups, 1 group commands

get(cell=Cell.Default) → RsSmbv.enums.DataSourceA

# SCPI: [SOURce<HW>]:BB:TDSCdma:DOWN:CELL<ST>:ENH:DCH:HSUPA:DATA
value: enums.DataSourceA = driver.source.bb.tdscdma.down.cell.enh.dch.hsupa.data.get(cell = repcap.Cell.Default)

The command determines the data source for the HSDPA/HSUPA channels.

param cell

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cell’)

return

data: PN9| PN11| PN15| PN16| PN20| PN21| PN23| DLISt| ZERO| ONE| PATTern PNxx PRBS data as per CCITT with period lengths between 29-1 and 223-1 is generated internally. DLISt Internal data from a programmable data list is used. ZERO | ONE Internal 0 and 1 data is used. PATTern A user-definable bit pattern with a maximum length of 64 bits is generated internally.

set(data: RsSmbv.enums.DataSourceA, cell=Cell.Default) → None

# SCPI: [SOURce<HW>]:BB:TDSCdma:DOWN:CELL<ST>:ENH:DCH:HSUPA:DATA
driver.source.bb.tdscdma.down.cell.enh.dch.hsupa.data.set(data = enums.DataSourceA.DLISt, cell = repcap.Cell.Default)

The command determines the data source for the HSDPA/HSUPA channels.

param data

PN9| PN11| PN15| PN16| PN20| PN21| PN23| DLISt| ZERO| ONE| PATTern PNxx PRBS data as per CCITT with period lengths between 29-1 and 223-1 is generated internally. DLISt Internal data from a programmable data list is used. ZERO | ONE Internal 0 and 1 data is used. PATTern A user-definable bit pattern with a maximum length of 64 bits is generated internally.

param cell

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cell’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.tdscdma.down.cell.enh.dch.hsupa.data.clone()

Subgroups

• Dselect
• Pattern