Cblock<CommandBlock>

RepCap Settings

# Range: Nr1 .. Nr100
rc = driver.source.bb.nfc.cblock.repcap_commandBlock_get()
driver.source.bb.nfc.cblock.repcap_commandBlock_set(repcap.CommandBlock.Nr1)

SCPI Commands :

[SOURce<HW>]:BB:NFC:CBLock<CH>:COPY
[SOURce<HW>]:BB:NFC:CBLock<CH>:DELete
class CblockCls[source]

Cblock commands group definition. 129 total commands, 107 Subgroups, 2 group commands Repeated Capability: CommandBlock, default value after init: CommandBlock.Nr1

copy(commandBlock=CommandBlock.Default) → None[source]
# SCPI: [SOURce<HW>]:BB:NFC:CBLock<CH>:COPY
driver.source.bb.nfc.cblock.copy(commandBlock = repcap.CommandBlock.Default)

Copies a command block for later use.

param commandBlock

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cblock’)

copy_with_opc(commandBlock=CommandBlock.Default, opc_timeout_ms: int = - 1) → None[source]
delete(commandBlock=CommandBlock.Default) → None[source]
# SCPI: [SOURce<HW>]:BB:NFC:CBLock<CH>:DELete
driver.source.bb.nfc.cblock.delete(commandBlock = repcap.CommandBlock.Default)

Removes a command block from the command sequence.

param commandBlock

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cblock’)

delete_with_opc(commandBlock=CommandBlock.Default, opc_timeout_ms: int = - 1) → None[source]

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.nfc.cblock.clone()

Subgroups