Clock

SCPI Commands :

[SOURce<HW>]:BB:MCCW:CLOCk:MODE
[SOURce<HW>]:BB:MCCW:CLOCk:MULTiplier
[SOURce<HW>]:BB:MCCW:CLOCk:SOURce
[SOURce<HW>]:BB:MCCW:CLOCk

Commands in total: 6

Subgroups: 1

Direct child commands: 4

get_mode() → ClocModeB

# [SOURce<HW>]:BB:MCCW:CLOCk:MODE
value: enums.ClocModeB = driver.source.bb.mccw.clock.get_mode()

No help available

get_multiplier() → int

# [SOURce<HW>]:BB:MCCW:CLOCk:MULTiplier
value: int = driver.source.bb.mccw.clock.get_multiplier()

No help available

get_source() → ClockSourceA

# [SOURce<HW>]:BB:MCCW:CLOCk:SOURce
value: enums.ClockSourceA = driver.source.bb.mccw.clock.get_source()

Selects the clock source:

• INTernal: Internal clock reference

Returns:

source: INTernal

get_value() → float

# [SOURce<HW>]:BB:MCCW:CLOCk
value: float = driver.source.bb.mccw.clock.get_value()

Queries the output clock rate. The output clock rate depends on the number of carriers and on the selected carrier spacing.

Returns:

clock: float Range: 0 to Max

set_mode(mode: ClocModeB) → None

# [SOURce<HW>]:BB:MCCW:CLOCk:MODE
driver.source.bb.mccw.clock.set_mode(mode = enums.ClocModeB.MSAMple)

No help available

set_multiplier(multiplier: int) → None

# [SOURce<HW>]:BB:MCCW:CLOCk:MULTiplier
driver.source.bb.mccw.clock.set_multiplier(multiplier = 1)

No help available

set_source(source: ClockSourceA) → None

# [SOURce<HW>]:BB:MCCW:CLOCk:SOURce
driver.source.bb.mccw.clock.set_source(source = enums.ClockSourceA.INTernal)

Selects the clock source:

• INTernal: Internal clock reference

Parameters:

source – INTernal

Cloning the Group

# Create a copy of the original group, that exists independently
clock_copy = driver.source.bb.mccw.clock.clone()

Subgroups

• Synchronization
  • Execute