Ulobe

SCPI Command :

[SOURce<HW>]:[BB]:ILS:[GSLope]:ULOBe:[FREQuency]

class UlobeCls[source]

Ulobe commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get_frequency() → float[source]

# SCPI: [SOURce<HW>]:[BB]:ILS:[GSLope]:ULOBe:[FREQuency]
value: float = driver.source.bb.ils.gslope.ulobe.get_frequency()

Sets the modulation frequency of the antenna lobe arranged at the top viewed from the air plane for the ILS glide slope modulation signal.

return

frequency: float Range: 60 to 120

set_frequency(frequency: float) → None[source]

# SCPI: [SOURce<HW>]:[BB]:ILS:[GSLope]:ULOBe:[FREQuency]
driver.source.bb.ils.gslope.ulobe.set_frequency(frequency = 1.0)

Sets the modulation frequency of the antenna lobe arranged at the top viewed from the air plane for the ILS glide slope modulation signal.

param frequency

float Range: 60 to 120