Icao

SCPI Command :

[SOURce<HW>]:[BB]:ILS:[GS]:ICAO:CHANnel

class IcaoCls[source]

Icao commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get_channel() → RsSmbv.enums.AvionicIlsIcaoChan[source]

# SCPI: [SOURce<HW>]:[BB]:ILS:[GS]:ICAO:CHANnel
value: enums.AvionicIlsIcaoChan = driver.source.bb.ils.gs.icao.get_channel()

Sets the ICAO channel and the corresponding transmitting frequency. If avionic standard modulation is activated and you change the ‘RF Frequency’, the frequency value of the closest ICAO channel is applied automatically. The ‘ICAO Channel’ is also updated. The ICAO channel settings for ILS glide slope/localizer components are coupled. For an overview of the ILS ICAO channel frequencies, see Table ‘ILS ICAO channels and frequencies (MHz) ‘.

return

channel: CH18X| CH18Y| CH20X| CH20Y| CH22X| CH22Y| CH24X| CH24Y| CH26X| CH26Y| CH28X| CH28Y| CH30X| CH30Y| CH32X| CH32Y| CH34X| CH34Y| CH36X| CH36Y| CH38X| CH38Y| CH40X| CH40Y| CH42X| CH42Y| CH44X| CH44Y| CH46X| CH46Y| CH48X| CH48Y| CH50X| CH50Y| CH52X| CH52Y| CH54X| CH54Y| CH56X| CH56Y

set_channel(channel: RsSmbv.enums.AvionicIlsIcaoChan) → None[source]

# SCPI: [SOURce<HW>]:[BB]:ILS:[GS]:ICAO:CHANnel
driver.source.bb.ils.gs.icao.set_channel(channel = enums.AvionicIlsIcaoChan.CH18X)

Sets the ICAO channel and the corresponding transmitting frequency. If avionic standard modulation is activated and you change the ‘RF Frequency’, the frequency value of the closest ICAO channel is applied automatically. The ‘ICAO Channel’ is also updated. The ICAO channel settings for ILS glide slope/localizer components are coupled. For an overview of the ILS ICAO channel frequencies, see Table ‘ILS ICAO channels and frequencies (MHz) ‘.

param channel

CH18X| CH18Y| CH20X| CH20Y| CH22X| CH22Y| CH24X| CH24Y| CH26X| CH26Y| CH28X| CH28Y| CH30X| CH30Y| CH32X| CH32Y| CH34X| CH34Y| CH36X| CH36Y| CH38X| CH38Y| CH40X| CH40Y| CH42X| CH42Y| CH44X| CH44Y| CH46X| CH46Y| CH48X| CH48Y| CH50X| CH50Y| CH52X| CH52Y| CH54X| CH54Y| CH56X| CH56Y