BbOnly

SCPI Command :

[SOURce<HW>]:BB:GSM:PRAMp:BBONly:[STATe]

class BbOnlyCls

BbOnly commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get_state() → bool

# SCPI: [SOURce<HW>]:BB:GSM:PRAMp:BBONly:[STATe]
value: bool = driver.source.bb.gsm.pramp.bbOnly.get_state()

Note: This command is available for instruments with RF output only. Selects power ramping in the baseband only or mixed power ramping in the baseband and the RF section. The ‘ON’ setting is mandatory if, with power ramping active, only the baseband signal is output (I/Q outputs) , or, in case of two-path instruments, if a baseband signal is applied to two RF paths (RF A and RF B) . Only then can a signal with a defined, predictable level be output.

return

state: 1| ON| 0| OFF