Select

SCPI Command :

[SOURce<HW>]:BB:GSM:[FRAMe<DI>]:SLOT<ST0>:[SUBChannel<US>]:[USER<CH>]:[SOURce]:TSC:SELect

class SelectCls

Select commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(frameIx=FrameIx.Default, slotNull=SlotNull.Default, subchannel=Subchannel.Default, userIx=UserIx.Default) → RsSmbv.enums.GsmBursTsc

# SCPI: [SOURce<HW>]:BB:GSM:[FRAMe<DI>]:SLOT<ST0>:[SUBChannel<US>]:[USER<CH>]:[SOURce]:TSC:SELect
value: enums.GsmBursTsc = driver.source.bb.gsm.frame.slot.subChannel.user.source.tsc.select.get(frameIx = repcap.FrameIx.Default, slotNull = repcap.SlotNull.Default, subchannel = repcap.Subchannel.Default, userIx = repcap.UserIx.Default)

The command selects the training sequence code. The values specified in GSM 5.02 are T0…T7. When USER is selected, the value specified with the aid of the …:TSC:USER command described next is used.

param frameIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Frame’)

param slotNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Slot’)

param subchannel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘SubChannel’)

param userIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)

return

select: T0| T1| T2| T3| T4| T5| T6| T7| USER

set(select: RsSmbv.enums.GsmBursTsc, frameIx=FrameIx.Default, slotNull=SlotNull.Default, subchannel=Subchannel.Default, userIx=UserIx.Default) → None

# SCPI: [SOURce<HW>]:BB:GSM:[FRAMe<DI>]:SLOT<ST0>:[SUBChannel<US>]:[USER<CH>]:[SOURce]:TSC:SELect
driver.source.bb.gsm.frame.slot.subChannel.user.source.tsc.select.set(select = enums.GsmBursTsc.T0, frameIx = repcap.FrameIx.Default, slotNull = repcap.SlotNull.Default, subchannel = repcap.Subchannel.Default, userIx = repcap.UserIx.Default)

The command selects the training sequence code. The values specified in GSM 5.02 are T0…T7. When USER is selected, the value specified with the aid of the …:TSC:USER command described next is used.

param select

T0| T1| T2| T3| T4| T5| T6| T7| USER

param frameIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Frame’)

param slotNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Slot’)

param subchannel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘SubChannel’)

param userIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)