Delay

SCPI Command :

[SOURce<HW>]:BB:GNSS:TRIGger:OUTPut<CH>:DELay

class DelayCls

Delay commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(output=Output.Default) → float

# SCPI: [SOURce<HW>]:BB:GNSS:TRIGger:OUTPut<CH>:DELay
value: float = driver.source.bb.gnss.trigger.output.delay.get(output = repcap.Output.Default)

Defines the delay between the signal on the marker outputs and the start of the signals.

param output

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)

return

delay: float Range: 0 to 0.1822215935

set(delay: float, output=Output.Default) → None

# SCPI: [SOURce<HW>]:BB:GNSS:TRIGger:OUTPut<CH>:DELay
driver.source.bb.gnss.trigger.output.delay.set(delay = 1.0, output = repcap.Output.Default)

Defines the delay between the signal on the marker outputs and the start of the signals.

param delay

float Range: 0 to 0.1822215935

param output

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)