Execute

SCPI Command :

[SOURce<HW>]:BB:GNSS:TRIGger:ARM:EXECute
class ExecuteCls[source]

Execute commands group definition. 1 total commands, 0 Subgroups, 1 group commands

set() None[source]
# SCPI: [SOURce<HW>]:BB:GNSS:TRIGger:ARM:EXECute
driver.source.bb.gnss.trigger.arm.execute.set()

Stops (arms) waveform output.

set_with_opc(opc_timeout_ms: int = - 1) None[source]
# SCPI: [SOURce<HW>]:BB:GNSS:TRIGger:ARM:EXECute
driver.source.bb.gnss.trigger.arm.execute.set_with_opc()

Stops (arms) waveform output.

Same as set, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.