Control

SCPI Command :

[SOURce<HW>]:BB:GNSS:SVID<CH>:NAVic:SIGNal:L5Band:SPS:DATA:NMESsage:CONTrol

class ControlCls[source]

Control commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(satelliteSvid=SatelliteSvid.Default) → RsSmbv.enums.NavMsgCtrl[source]

# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:NAVic:SIGNal:L5Band:SPS:DATA:NMESsage:CONTrol
value: enums.NavMsgCtrl = driver.source.bb.gnss.svid.navic.signal.l5Band.sps.data.nmessage.control.get(satelliteSvid = repcap.SatelliteSvid.Default)

Defines whether the navigation message parameters can be changed or not.

param satelliteSvid

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

return

nav_msg_control: OFF| EDIT| AUTO | OFF| EDIT| AUTO OFF Disables sending the navigation message. EDIT Enables configuration of the navigation message. AUTO Navigation message is generated automatically.

set(nav_msg_control: RsSmbv.enums.NavMsgCtrl, satelliteSvid=SatelliteSvid.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:NAVic:SIGNal:L5Band:SPS:DATA:NMESsage:CONTrol
driver.source.bb.gnss.svid.navic.signal.l5Band.sps.data.nmessage.control.set(nav_msg_control = enums.NavMsgCtrl.AUTO, satelliteSvid = repcap.SatelliteSvid.Default)

Defines whether the navigation message parameters can be changed or not.

param nav_msg_control

OFF| EDIT| AUTO | OFF| EDIT| AUTO OFF Disables sending the navigation message. EDIT Enables configuration of the navigation message. AUTO Navigation message is generated automatically.

param satelliteSvid

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)