Dshift

SCPI Command :

[SOURce<HW>]:BB:GNSS:SVID<CH>:NAVic:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:DSHift

class DshiftCls

Dshift commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(satelliteSvid=SatelliteSvid.Default, vehicle=Vehicle.Default, antenna=Antenna.Default, echo=Echo.Default) → float

# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:NAVic:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:DSHift
value: float = driver.source.bb.gnss.svid.navic.mpath.v.a.echo.dshift.get(satelliteSvid = repcap.SatelliteSvid.Default, vehicle = repcap.Vehicle.Default, antenna = repcap.Antenna.Default, echo = repcap.Echo.Default)

Sets an additional Doppler shift.

param satelliteSvid

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

param vehicle

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

param antenna

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)

param echo

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Echo’)

return

doppler_shift: float Range: -10E3 to 10E3, Unit: Hz

set(doppler_shift: float, satelliteSvid=SatelliteSvid.Default, vehicle=Vehicle.Default, antenna=Antenna.Default, echo=Echo.Default) → None

# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:NAVic:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:DSHift
driver.source.bb.gnss.svid.navic.mpath.v.a.echo.dshift.set(doppler_shift = 1.0, satelliteSvid = repcap.SatelliteSvid.Default, vehicle = repcap.Vehicle.Default, antenna = repcap.Antenna.Default, echo = repcap.Echo.Default)

Sets an additional Doppler shift.

param doppler_shift

float Range: -10E3 to 10E3, Unit: Hz

param satelliteSvid

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

param vehicle

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)

param antenna

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)

param echo

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Echo’)