TypePy
SCPI Command :
[SOURce<HW>]:BB:GNSS:SVID<CH>:GPS:SIGNal:L5Band:L5S:DATA:NMESsage:TYPE
- class TypePyCls[source]
TypePy commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- get(satelliteSvid=SatelliteSvid.Default) RsSmbv.enums.DataSourGnss [source]
# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:GPS:SIGNal:L5Band:L5S:DATA:NMESsage:TYPE value: enums.DataSourGnss = driver.source.bb.gnss.svid.gps.signal.l5Band.l5S.data.nmessage.typePy.get(satelliteSvid = repcap.SatelliteSvid.Default)
Sets the data source used for the generation of the navigation message.
- param satelliteSvid
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)
- return
data: ZERO| ONE| PATTern| PN9| PN11| PN15| PN16| PN20| PN21| PN23| DLISt| RNData| ZNData ZERO|ONE|PATTern|PN9|PN11|PN15|PN16|PN20|PN21|PN23|DLISt Arbitrary data source. Define the pattern and load an existing data list file with the commands: [:SOURcehw]:BB:GNSS:SVIDch:GPS:SIGNal:L1Band:CA:DATA:NMESsage:PATTern [:SOURcehw]:BB:GNSS:SVIDch:GPS:SIGNal:L1Band:CA:DATA:NMESsage:DSELect RNData Summary indication for real navigation data. Current navigation message type depends on the GNSS system and the RF band, e.g. for GPS in L1 RNData means LNAV. ZNData Zero navigation data Sets the orbit and clock correction parameters in the broadcasted navigation message to zero.
- set(data: RsSmbv.enums.DataSourGnss, satelliteSvid=SatelliteSvid.Default) None [source]
# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:GPS:SIGNal:L5Band:L5S:DATA:NMESsage:TYPE driver.source.bb.gnss.svid.gps.signal.l5Band.l5S.data.nmessage.typePy.set(data = enums.DataSourGnss.DLISt, satelliteSvid = repcap.SatelliteSvid.Default)
Sets the data source used for the generation of the navigation message.
- param data
ZERO| ONE| PATTern| PN9| PN11| PN15| PN16| PN20| PN21| PN23| DLISt| RNData| ZNData ZERO|ONE|PATTern|PN9|PN11|PN15|PN16|PN20|PN21|PN23|DLISt Arbitrary data source. Define the pattern and load an existing data list file with the commands: [:SOURcehw]:BB:GNSS:SVIDch:GPS:SIGNal:L1Band:CA:DATA:NMESsage:PATTern [:SOURcehw]:BB:GNSS:SVIDch:GPS:SIGNal:L1Band:CA:DATA:NMESsage:DSELect RNData Summary indication for real navigation data. Current navigation message type depends on the GNSS system and the RF band, e.g. for GPS in L1 RNData means LNAV. ZNData Zero navigation data Sets the orbit and clock correction parameters in the broadcasted navigation message to zero.
- param satelliteSvid
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)