State

SCPI Command :

[SOURce<HW>]:BB:GNSS:SVID<CH>:GPS:SIGNal:L1Band:CA:DATA:NMESsage:[STATe]

class StateCls[source]

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(satelliteSvid=SatelliteSvid.Default) → bool[source]

# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:GPS:SIGNal:L1Band:CA:DATA:NMESsage:[STATe]
value: bool = driver.source.bb.gnss.svid.gps.signal.l1Band.ca.data.nmessage.state.get(satelliteSvid = repcap.SatelliteSvid.Default)

In tracking mode, enables configuration of the navigation message parameters.

param satelliteSvid

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)

return

state: 1| ON| 0| OFF

set(state: bool, satelliteSvid=SatelliteSvid.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:GPS:SIGNal:L1Band:CA:DATA:NMESsage:[STATe]
driver.source.bb.gnss.svid.gps.signal.l1Band.ca.data.nmessage.state.set(state = False, satelliteSvid = repcap.SatelliteSvid.Default)

In tracking mode, enables configuration of the navigation message parameters.

param state

1| ON| 0| OFF

param satelliteSvid

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)