IcPhase
SCPI Command :
[SOURce<HW>]:BB:GNSS:SVID<CH>:GPS:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:ICPHase
- class IcPhaseCls[source]
IcPhase commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- get(satelliteSvid=SatelliteSvid.Default, vehicle=Vehicle.Default, antenna=Antenna.Default, echo=Echo.Default) float[source]
# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:GPS:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:ICPHase value: float = driver.source.bb.gnss.svid.gps.mpath.v.a.echo.icPhase.get(satelliteSvid = repcap.SatelliteSvid.Default, vehicle = repcap.Vehicle.Default, antenna = repcap.Antenna.Default, echo = repcap.Echo.Default)
Sets an initial code phase for the selected echo.
- param satelliteSvid
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)
- param vehicle
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)
- param antenna
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)
- param echo
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Echo’)
- return
init_code_phase: float Range: 0 to 3000, Unit: m
- set(init_code_phase: float, satelliteSvid=SatelliteSvid.Default, vehicle=Vehicle.Default, antenna=Antenna.Default, echo=Echo.Default) None[source]
# SCPI: [SOURce<HW>]:BB:GNSS:SVID<CH>:GPS:MPATh:[V<US>]:[A<GR>]:ECHO<S2US0>:ICPHase driver.source.bb.gnss.svid.gps.mpath.v.a.echo.icPhase.set(init_code_phase = 1.0, satelliteSvid = repcap.SatelliteSvid.Default, vehicle = repcap.Vehicle.Default, antenna = repcap.Antenna.Default, echo = repcap.Echo.Default)
Sets an initial code phase for the selected echo.
- param init_code_phase
float Range: 0 to 3000, Unit: m
- param satelliteSvid
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Svid’)
- param vehicle
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘V’)
- param antenna
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘A’)
- param echo
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Echo’)