Ai<AiOrder>

RepCap Settings

# Range: Nr1 .. Nr3
rc = driver.source.bb.gnss.atmospheric.galileo.nmessage.fnav.ionospheric.ai.repcap_aiOrder_get()
driver.source.bb.gnss.atmospheric.galileo.nmessage.fnav.ionospheric.ai.repcap_aiOrder_set(repcap.AiOrder.Nr1)

SCPI Command :

[SOURce<HW>]:BB:GNSS:ATMospheric:GALileo:NMESsage:FNAV:IONospheric:AI<CH0>

class AiCls[source]

Ai commands group definition. 2 total commands, 1 Subgroups, 1 group commands Repeated Capability: AiOrder, default value after init: AiOrder.Nr1

get(aiOrder=AiOrder.Default) → int[source]

# SCPI: [SOURce<HW>]:BB:GNSS:ATMospheric:GALileo:NMESsage:FNAV:IONospheric:AI<CH0>
value: int = driver.source.bb.gnss.atmospheric.galileo.nmessage.fnav.ionospheric.ai.get(aiOrder = repcap.AiOrder.Default)

Sets the parameters effective ionization level 1st to 3rd order of the satellite’s navigation message.

param aiOrder

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ai’)

return

ai: integer Range: a_i0 (0 to 2047) , a_i1 (-1024 to 1023) , a_i2 (-8192 to 8191)

set(ai: int, aiOrder=AiOrder.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:GNSS:ATMospheric:GALileo:NMESsage:FNAV:IONospheric:AI<CH0>
driver.source.bb.gnss.atmospheric.galileo.nmessage.fnav.ionospheric.ai.set(ai = 1, aiOrder = repcap.AiOrder.Default)

Sets the parameters effective ionization level 1st to 3rd order of the satellite’s navigation message.

param ai

integer Range: a_i0 (0 to 2047) , a_i1 (-1024 to 1023) , a_i2 (-8192 to 8191)

param aiOrder

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ai’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.gnss.atmospheric.galileo.nmessage.fnav.ionospheric.ai.clone()

Subgroups

Unscaled