State

SCPI Command :

[SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:STMPhy:L1M<CH>:STATe
class StateCls[source]

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channel=Channel.Default) → bool[source]
# SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:STMPhy:L1M<CH>:STATe
value: bool = driver.source.bb.btooth.econfiguration.pconfiguration.stmPhy.l1M.state.get(channel = repcap.Channel.Default)

Specifies the physical layers in Central-to-Peripheral (..:MTSPhy:..) or Peripheral-to-Central (..:STMPhy:..) direction. Information is signaled via LL_PHY_UPDATE_IND.

INTRO_CMD_HELP: You can enable one or more PHYs:

  • L1M for LE uncoded 1 Msymbol/s PHY.

  • L2M for LE uncoded 2 Msymbol/s PHY.

  • LCOD for LE coded 1 Msymbol/s PHY.

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘L1M’)

return

stmp: 1| ON| 0| OFF

set(stmp: bool, channel=Channel.Default) → None[source]
# SCPI: [SOURce<HW>]:BB:BTOoth:ECONfiguration:PCONfiguration:STMPhy:L1M<CH>:STATe
driver.source.bb.btooth.econfiguration.pconfiguration.stmPhy.l1M.state.set(stmp = False, channel = repcap.Channel.Default)

Specifies the physical layers in Central-to-Peripheral (..:MTSPhy:..) or Peripheral-to-Central (..:STMPhy:..) direction. Information is signaled via LL_PHY_UPDATE_IND.

INTRO_CMD_HELP: You can enable one or more PHYs:

  • L1M for LE uncoded 1 Msymbol/s PHY.

  • L2M for LE uncoded 2 Msymbol/s PHY.

  • LCOD for LE coded 1 Msymbol/s PHY.

param stmp

1| ON| 0| OFF

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘L1M’)