LogPoint<IndexNull>

RepCap Settings

# Range: Nr0 .. Nr63
rc = driver.source.bb.eutra.logGen.downlink.logPoint.repcap_indexNull_get()
driver.source.bb.eutra.logGen.downlink.logPoint.repcap_indexNull_set(repcap.IndexNull.Nr0)

SCPI Command :

[SOURce<HW>]:BB:EUTRa:LOGGen:DL:LOGPoint<CH0>

class LogPointCls

LogPoint commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: IndexNull, default value after init: IndexNull.Nr0

get(indexNull=IndexNull.Default) → bool

# SCPI: [SOURce<HW>]:BB:EUTRa:LOGGen:DL:LOGPoint<CH0>
value: bool = driver.source.bb.eutra.logGen.downlink.logPoint.get(indexNull = repcap.IndexNull.Default)

Enables/disables one particular logging point. Refer to ‘Signal processing chains and logging points’ for description on the available logging points.

param indexNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘LogPoint’)

return

log_point_state: 1| ON| 0| OFF

set(log_point_state: bool, indexNull=IndexNull.Default) → None

# SCPI: [SOURce<HW>]:BB:EUTRa:LOGGen:DL:LOGPoint<CH0>
driver.source.bb.eutra.logGen.downlink.logPoint.set(log_point_state = False, indexNull = repcap.IndexNull.Default)

Enables/disables one particular logging point. Refer to ‘Signal processing chains and logging points’ for description on the available logging points.

param log_point_state

1| ON| 0| OFF

param indexNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘LogPoint’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.eutra.logGen.downlink.logPoint.clone()