FilterPy

SCPI Commands :

[SOURce<HW>]:BB:EUTRa:FILTer:AUTO
[SOURce<HW>]:BB:EUTRa:FILTer:MODE
[SOURce<HW>]:BB:EUTRa:FILTer:TYPE
Commands in total: 17
Subgroups: 1
Direct child commands: 3
get_auto() → bool[source]
# [SOURce<HW>]:BB:EUTRa:FILTer:AUTO
value: bool = driver.source.bb.eutra.filterPy.get_auto()

Queries if the internal (‘Auto’) filter is applied. This filter is selected automatically, if carrier aggregation with carriers that span different bandwidths is used.

Returns:

auto: 1 | ON | 0| OFF

get_mode() → FiltOptMode[source]
# [SOURce<HW>]:BB:EUTRa:FILTer:MODE
value: enums.FiltOptMode = driver.source.bb.eutra.filterPy.get_mode()

Selects an offline or real-time filter mode.

Returns:

opt_mode: RTime | OFFLine

get_type_py() → DmFilterEutra[source]
# [SOURce<HW>]:BB:EUTRa:FILTer:TYPE
value: enums.DmFilterEutra = driver.source.bb.eutra.filterPy.get_type_py()

Selects the baseband filter type.

Returns:

type_py: RCOSine | COSine | GAUSs | LGAuss | CONE | COF705 | COEQualizer | COFequalizer | C2K3x | RECTangle | PGAuss | LPASs | DIRac | ENPShape | EWPShape | LTEFilter | LPASSEVM | SPHase | APCO25 | USER

set_mode(opt_mode: FiltOptMode) → None[source]
# [SOURce<HW>]:BB:EUTRa:FILTer:MODE
driver.source.bb.eutra.filterPy.set_mode(opt_mode = enums.FiltOptMode.OFFLine)

Selects an offline or real-time filter mode.

Parameters:

opt_mode – RTime | OFFLine

set_type_py(type_py: DmFilterEutra) → None[source]
# [SOURce<HW>]:BB:EUTRa:FILTer:TYPE
driver.source.bb.eutra.filterPy.set_type_py(type_py = enums.DmFilterEutra.APCO25)

Selects the baseband filter type.

Parameters:

type_py – RCOSine | COSine | GAUSs | LGAuss | CONE | COF705 | COEQualizer | COFequalizer | C2K3x | RECTangle | PGAuss | LPASs | DIRac | ENPShape | EWPShape | LTEFilter | LPASSEVM | SPHase | APCO25 | USER

Cloning the Group

# Create a copy of the original group, that exists independently
filterPy_copy = driver.source.bb.eutra.filterPy.clone()

Subgroups