Tdd

SCPI Commands :

[SOURce<HW>]:BB:EUTRa:TDD:SPSConf
[SOURce<HW>]:BB:EUTRa:TDD:UDConf
[SOURce<HW>]:BB:EUTRa:TDD:UPTS
class TddCls[source]

Tdd commands group definition. 3 total commands, 0 Subgroups, 3 group commands

get_sps_conf() int[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:TDD:SPSConf
value: int = driver.source.bb.eutra.tdd.get_sps_conf()

In TDD mode, sets the special subframe configuration number.

return

spec_subfr_conf: integer Range: 0 to 9

get_ud_conf() int[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:TDD:UDConf
value: int = driver.source.bb.eutra.tdd.get_ud_conf()

In TDD mode, sets the uplink/downlink configuration number.

return

ul_dl_conf: integer Range: 0 to 6

get_upts() RsSmw.enums.Count[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:TDD:UPTS
value: enums.Count = driver.source.bb.eutra.tdd.get_upts()

If [:SOURce<hw>]:BB:EUTRa:TDD:SPSConf 10, sets the number of UpTPS symbols.

return

up_pts_symbol: 1| 2

set_sps_conf(spec_subfr_conf: int) None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:TDD:SPSConf
driver.source.bb.eutra.tdd.set_sps_conf(spec_subfr_conf = 1)

In TDD mode, sets the special subframe configuration number.

param spec_subfr_conf

integer Range: 0 to 9

set_ud_conf(ul_dl_conf: int) None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:TDD:UDConf
driver.source.bb.eutra.tdd.set_ud_conf(ul_dl_conf = 1)

In TDD mode, sets the uplink/downlink configuration number.

param ul_dl_conf

integer Range: 0 to 6

set_upts(up_pts_symbol: RsSmw.enums.Count) None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:TDD:UPTS
driver.source.bb.eutra.tdd.set_upts(up_pts_symbol = enums.Count._1)

If [:SOURce<hw>]:BB:EUTRa:TDD:SPSConf 10, sets the number of UpTPS symbols.

param up_pts_symbol

1| 2