FormatPy

SCPI Commands :

FORMat:BORDer
FORMat:SREGister
FORMat:[DATA]
class FormatPyCls[source]

FormatPy commands group definition. 3 total commands, 0 Subgroups, 3 group commands

get_border() RsSmw.enums.ByteOrder[source]
# SCPI: FORMat:BORDer
value: enums.ByteOrder = driver.formatPy.get_border()

Determines the sequence of bytes within a binary block. This only affects blocks which use the IEEE754 format internally.

return

border: NORMal| SWAPped NORMal Expects/sends the least significant byte of each IEEE754 floating-point number first and the most significant byte last. SWAPped Expects/sends the most significant byte of each IEEE754 floating-point number first and the least significant byte last.

get_data() RsSmw.enums.FormData[source]
# SCPI: FORMat:[DATA]
value: enums.FormData = driver.formatPy.get_data()

Determines the data format the instrument uses to return data via the IEC/IEEE bus. The instrument automatically detects the data format used by the controller, and assigns it accordingly. Data format determined by this SCPI command is in this case irrelevant.

return

data: ASCii| PACKed ASCii Transfers numerical data as plain text separated by commas. PACKed Transfers numerical data as binary block data. The format within the binary data depends on the command. The various binary data formats are explained in the description of the parameter types.

get_sregister() RsSmw.enums.FormStatReg[source]
# SCPI: FORMat:SREGister
value: enums.FormStatReg = driver.formatPy.get_sregister()

Determines the numeric format for responses of the status register.

return

format_py: ASCii| BINary| HEXadecimal| OCTal ASCii Returns the register content as a decimal number. BINary|HEXadecimal|OCTal Returns the register content either as a binary, hexadecimal or octal number. According to the selected format, the number starts with #B (binary) , #H (hexadecimal) or #O (octal) .

set_border(border: RsSmw.enums.ByteOrder) None[source]
# SCPI: FORMat:BORDer
driver.formatPy.set_border(border = enums.ByteOrder.NORMal)

Determines the sequence of bytes within a binary block. This only affects blocks which use the IEEE754 format internally.

param border

NORMal| SWAPped NORMal Expects/sends the least significant byte of each IEEE754 floating-point number first and the most significant byte last. SWAPped Expects/sends the most significant byte of each IEEE754 floating-point number first and the least significant byte last.

set_data(data: RsSmw.enums.FormData) None[source]
# SCPI: FORMat:[DATA]
driver.formatPy.set_data(data = enums.FormData.ASCii)

Determines the data format the instrument uses to return data via the IEC/IEEE bus. The instrument automatically detects the data format used by the controller, and assigns it accordingly. Data format determined by this SCPI command is in this case irrelevant.

param data

ASCii| PACKed ASCii Transfers numerical data as plain text separated by commas. PACKed Transfers numerical data as binary block data. The format within the binary data depends on the command. The various binary data formats are explained in the description of the parameter types.

set_sregister(format_py: RsSmw.enums.FormStatReg) None[source]
# SCPI: FORMat:SREGister
driver.formatPy.set_sregister(format_py = enums.FormStatReg.ASCii)

Determines the numeric format for responses of the status register.

param format_py

ASCii| BINary| HEXadecimal| OCTal ASCii Returns the register content as a decimal number. BINary|HEXadecimal|OCTal Returns the register content either as a binary, hexadecimal or octal number. According to the selected format, the number starts with #B (binary) , #H (hexadecimal) or #O (octal) .